Miner- Claymore's Zcash Miner

So perhaps I did not wait long enough. Is there a changelog for 9.1? What does or is 9.1 supposed to improve on? Do you know? Curious. Thanks…

  • reduced devfee, it’s 2% if you use secure SSL/TLS connection.
2 Likes

Thanks. That’s reason enough for me. :slight_smile:

1 Like

on 9.1 the most solid last phase for my rx470 looks 1170@904mv core and 1750@904mv mem controller, doing 197H/s.
Cores are stable at ~70W, the spikes on memory are not that scary (doesn’t go up to 115+W as it does with offsets from stock on mem part but hits 90W occasionally, from around 55W) the card on average takes total 125W from the wall.

Looks like offsets are no good, minimum I can reach (depending on the card) is about -20, which gives around 930mv.
Hardcoded values are better.

And btw these spikes mean that you should make sure you’ve got 30% spare power on your PSUs.

Has anyone seen increased latency/less shares using the secure connections?

SSL does add some latency so it’s entirely plausible that you would see a slight uptick in rejects/latency. Shouldn’t be prohibitive though.

Running claymore upon RX480 8gb is better than 3xR9-270(2gb) GPU’s?

Hi guys.

I’m running claymore version 9.1 to mine Zcash. It’s running stable but something seems off.
This is the output:

ZEC: 12/16/16-13:43:21 - New job from eu1-zcash.flypool.org:3443
ZEC - Total Speed: 374.633 H/s, Total Shares: 12364, Rejected: 61, Time: 18:59
ZEC: GPU0 201.921 H/s, GPU1 172.712 H/s
GPU0 t=68C fan=87%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:43:28 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:30 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:43:34 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:39 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:43:42 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (32 ms)!
GPU0 t=68C fan=87%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:43:57 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:43:59 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:01 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
GPU0 t=68C fan=87%, GPU1 t=53C fan=16%
ZEC: 12/16/16-13:44:26 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:27 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:32 - SHARE FOUND - (GPU 0)
ZEC: 12/16/16-13:44:33 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (202 ms)!
ZEC: Share accepted (218 ms)!
ZEC: 12/16/16-13:44:36 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (156 ms)!
ZEC: 12/16/16-13:44:37 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:38 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (437 ms)!
ZEC: 12/16/16-13:44:39 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:49 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:44:50 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (47 ms)!
ZEC: 12/16/16-13:44:52 - SHARE FOUND - (GPU 1)
ZEC: Share accepted (46 ms)!
GPU0 t=68C fan=82%, GPU1 t=52C fan=16%
ZEC: 12/16/16-13:44:55 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (374 ms)!
ZEC: 12/16/16-13:44:56 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (31 ms)!
ZEC: 12/16/16-13:45:02 - New job from eu1-zcash.flypool.org:3443
ZEC - Total Speed: 375.053 H/s, Total Shares: 12386, Rejected: 61, Time: 19:01
ZEC: GPU0 201.920 H/s, GPU1 173.142 H/s

This line concerns me:
GPU0 t=68C fan=82%, GPU1 t=52C fan=16%
I have 2 GPU’s running: 2x HD 7950

GPU1 seems to be acting lazy :slight_smile: How comes that the fan is only at 16% and t = 52C? It seems to me like the card is not performing as it should. Is this behavior normal?

I think you have to re-install the drivers, have you tried with 16.6 ?

Which exact driver 16.6 are you referring too. I can’t seem to find the same driver on my on setup to use on my other on.

Download ReLive drivers working very well with claymore v9.1

Well seems there are a few people offering cracked Claymore software with no fee or 1% to them instead of Claymore, would be a good time to drop fee to 1% on next release I think

New version released…
I was getting 315H/s on 290x on 9.1, now i’m getting 343 H/s and on 290 278 H/s before, now 293 H/s.
In total 120 H/s mor

v9.2 gives 240h/s for my rx480 with 1340 mhz core :wink:

Thank you Claymore!

MSI R9 390X = 320 Sol

XFX RX480 8GB = 236 Sol
Windforce R9 Fury =316 Sol

What? :astonished:

I have a Asus 290x now I am getting 266 sol/s (with 9.2)!

And R9 Fury power usage ?

ZEC: 12/20/16-09:43:03 - New job from zec-us1.dwarfpool.com:3333
ZEC - Total Speed: 2027.585 H/s, Total Shares: 9, Rejected: 0, Time: 00:00
ZEC: GPU0 335.709 H/s, GPU1 340.671 H/s, GPU2 331.300 H/s, GPU3 337.772 H/s, GPU4 342.339 H/s, GPU5 339.793 H/s
ZEC: 12/20/16-09:43:06 - SHARE FOUND - (GPU 3)

r9 fury was averaging 323 before upgrade so definate improvement here… -i 6

I modded all cards with 390 and 390x :slight_smile:

all 290 and 390 variants are definitely up in hash rate same with my nanos
but the 470s and 480 are same hashrate maybe 2-5h/s more